Mapei Ultracare Multicleaner 1 Litre - for everyday cleaning

A concentrated neutral cleaner suitable for the everyday cleaning of both treated and untreated surfaces, with CO2 fully offset in the entire life cycle.

Concentrated cleaner with a very high yield for everyday cleaning and maintenance of surfaces

ADVANTAGES:

Indoor, outdoor, walls and floors

High yield

Floor cleaner

Biodegradability

Highly concentrated (to be diluted)

Dries without streaks

Suitable for treated and untreated surfaces

Cleans effectively and non-aggressively, respecting the material and any protector applied. Suitable for use on:

▪ porcelain and ceramic tiles;

▪ concrete flooring

▪ parquet with oil or paint finis

▪ terrazzo and terracotta;

▪ marble, granite and all natural stone, perfect for use on polished natural stone that is sensitive to aggressive detergents;

▪ quartz and marble agglomerates;

▪ flooring in LVT, linoleum, rubber and PV

APPLICATION PROCEDURE

Dilute UltraCare Multicleaner with water in ratio from 1 : 20 to 1 : 200 depending on the degree of concentration required and the level of dirt to be removed.

UltraCare Multicleaner can be used diluted 1 : 30 to undertake the initial clean after installation on delicate surfaces.

For routine maintenance dilute UltraCare Multicleaner 1 : 200 (50 ml of product in 10 litres of water). In this dilution it is not necessary to rinse the treated surfaces.

For extraordinary maintenance or more resistant dirt use the product at higher concentrations up to 1 : 20 (500ml of product in 10 litres of water). At these dilutions it is necessary to rinse the surfaces with water.

You can use the product altering the dilutions to those described above making it adaptable to your specific needs. The surface must be rinsed when used in a dilution other than 1 : 200. Please ensure that the surface is rinsed with plenty of clean water. 

UltraCare Multicleaner is a concentrated cleaner. Its special formula guarantees a high level of cleanliness respecting the surfaces on which it is used. It is suitable for use on all washable surfaces, even the most delicate thanks to the neutral pH. It is also characterized by a pleasant scent.

UltraCare Multicleaner when diluted (1 : 200) does not require rinsing as it leaves no residues and/or halos on the surfaces and can be used both indoors and outdoors. 

RECOMMENDATIONS

▪ Never use UltraCare Multicleaner on waxed surfaces at high concentration. In case of doubt, carry out a

preliminary test in an inconspicuous area to define the proper dilution neede

▪ Do not use UltraCare Multicleaner undiluted.

▪ When using UltraCare Multicleaner we advise to wear rubber gloves.

▪ Use on methacrylate baths only when diluted.

▪ UltraCare Multicleaner does not damage metal or galvanized surfaces; however, given the variety of materials available on the market, a preliminary test at different concentrations is always recommended.